Shockcraft Hot Oil Green for cartridge fork dampers and rear shock absorbers ridden hard from 0 to 100°C.  Try our simple fork oil selection charts to find out which oil you need for your brand of fork, terrain, climate and riding.

Heavy Duty Oil with high heat capacity and viscosity index:
18-19 cSt @ 40°C
6.2-6.3 cSt @ 100°C
Viscosity Index 325
Pour Point -54°C
Viscosity Class 3 wt to 4 wt

Perfect heavy duty & high temperature replacement for:
2.5 wt, 4 wt and 5 wt cartridge fork and rear shock oils (14-22 cSt)
3 wt and 7 wt shock fluids (14-22 cSt)
Manitou fork damper oil - all exept 2009+ Dorado
Manitou shock damper oil - all.
Rockshox fork dampers specifying 5 wt or 3 wt oil - all except hydracoil and Mag series.
Rockshox shock damper oil - all.
Fox fork dampers using R3 5 wt - FIT-CTD, FIT RC2, FIT4 etc.
Fox fork and shocks using 7 wt to 10 wt which require better sensitivity and cold weather performance.
Marzocchi shock damper oil - all.
Ohlins shock damper oil - all.
Cane Creek damper oil - all.

Limitations:
The extra viscosity will slightly increase trail feedback for lighter riders and lighter duty use which is often not desirable.  Use Hot Oil (Pink) or Hot Oil (Clear) instead.
This is not an open bath fork oil and does not lubricate bushings as well as Motorex Fork Oil (use 2.5 wt, 4 wt or 5 wt).
For open bath and semi-open bath forks which use damper oil for lubrication (Manitou Dorado, Marzocchi Dynamic Bleed, Avalanche etc) use Motorex 2.5 wt, 4 wt or 5 wt fork oil. These lubricate better.